1mtr 12V 14.4W LED STRIP 4000K IP20

12 Volt Self Adhesive 10mm High Output Led Strip With neutral White Leds .14.4 Watts Per Metre. 60 leds per metre . .After ordering the strip you will need a suitable driver . Please see our Led drivers for led strip .Each Length of strip Comes with a soldered 2 Metre Input Lead to connect to the driver. We also offer a bespoke service. The strip can be cut every 50mm Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink.

Self Adhesive Dimmable Led tape
10mm wide
Up to 3 metres length listed but any length or special requirement can be ordered by phone
Neutral white( 4000k )5050 leds
14.4 watts per metre
60 leds per metre
1350 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 2 metre soldered input lead
Warranty 3 years