1mtr 12V 18W LED STRIP 6000K IP20

Led strip 12 Volt High Output With cool White Leds .18 Watts Per Metre. 240 leds per metre . .After ordering the strip you will need a suitable driver . Please see our Led drivers for led strip .Each Length of strip Comes with a soldered 2 Metre Input Lead to connect to the driver. We also offer a bespoke service .The strip can be cut every 12.5mm. Please note,the DIY clip on connectors cannot be used with this strip due to the spacings of the leds.Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver.
Aluminium Profile should be used with this product otherwise your warranty may be void .Aluminium profile has many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
DIY connectors should not be used with this tape due to its high power rating

Dimmable Led strip with Self Adhesive back
This strip should be installed within aluminium profile to help with heat dissipation and extended life of the leds
10mm wide
Up to 3 metres length listed but any length or special requirement can be ordered by phone
Cool white( 6000k )3014 leds
18 watts per metre
240 leds per metre
2400 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 12.5mm
Supplied with a 2 metre soldered input lead
3 year warranty