8mm 150mm Input Lead With Connector (Old Style)

Connector and lead for providing an input from cut 8mm led strip to a led driver .The lead consists of 150mm live and neutral lead and a snap down connector .Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates on the 2 contacts in the connector.Once in line with the contacts the lid can be closed. If using a profile , please note the connectors are wider than the led strip so may not fit in your profile unless 12mm wide inside..

Led strip input connector for 8mm tape New style
Enables cut tape to be connected to a led driver
Maximum load with 12 volts = 24 watts
Maximum load with 24 volts = 48 watts
see photos and description
Width of connector 12mm
This connector can be used with 8mm -- 60 led per metre led tape
IT CANNOT BE USED WITH 120 LED per metre tape as the lid wont shut -see new type for use with 120 leds -See TL8MMIP150NEW