Corner connector for connecting 2 pieces of 8mm led strip through a 90 degree bend .The strip slides through the slot in the connector and locates under the 2 contacts in the connector.Once in line with the contacts the lid can be closed. When using the 9.6 watt strip the lid wont close ,due to the spacings of the leds .It works, however,the lid gives extra grip on the strip from being pulled out of position. If using a profile , please note the connectors are wider than the led strip so may not fit in your profile.
Corner connector for 8mm led strip Connects to led strips through 90 degrees Maximum load with 12 volts = 24 watts Maximum load with 24 volts = 48 watts see photos and description Width of connector 12mm
