Danlers CEDR6PLR Long Range Directional PIR

A long range occupancy switch PIR from Danlers: CEDR6PLR

DANLERS ceiling directional long range passive infra-red occupancy switches (PIR Switch) can be ceiling mounted into a Klik-AX socket.

These PIR switches incorporate a passive infra-red quad sensor to detect movement of a warm body within their detection zone (diagram A) and a photocell to monitor the ambient light level.

Upon detecting movement, if the ambient light is dark enough, the PIR switch will turn the load on. The ambient threshold can be set by the user to between approximately 30 lux and infinite lux (photocell inactive) via the LUX adjuster (diagram C). If no more movement is detected within a pre-selected time, then the PIR switch will turn the load off.

Time lag can be set via the TIME adjuster to 10 seconds, 20s, 40s, 1 minute 15 seconds, 2m30s,  5m, 10m, 20m or 40 minutes (diagram C).

Length of vision is up to 25metres. 

The barrel of this PIR switch can be rotated through 360 degrees and angled between horizontal and 45 degrees down. The longest detection range is achieved when the barrel is horizontal.

These PIR switches can switch up to: