An RCBO is an MCB (Minature circuit breaker) and RCD (Residual Current Device). This enables both overcurrent protection and earth fault current protection within a single module.
Terminal Capacity: 1P, 2P 6kA & 10kA Cable up to 16mm2
The single-pole RCBO width is (17.5mm) the same as an MCB, and can be fitted in a consumer unit when earth leak protection of an RCD is required.
Product Range EUB1RC
Standard(s) IEC 61009, EN 61009
Type A*
Certification CE, SEMKO
Characteristic Curve C
Rated Current (In) 6, 10, 16, 20, 32 & 40A
Rated Residual Operating Current IΔn 30mA
Standard Tripping Time 1 x IΔn ≤ 300ms
Standard Tripping Time 5 x IΔn ≤ 40ms
Rated Voltage (Ue) AC 230(240)V
Rated Frequency 50/60Hz
Rated impulse withstand Voltage (Uimp) 4kV
Number of Poles 1
Rated Short-Circuit Capacity (Icn) 6kA
Operating Temperature -25° to 40°C*
Altitude Not exceeding 2000 metres
Humidity Not exceeding 50% at 40°C and 90% at 20°C
Pollution Degree 2
Terminal protection IP20
Mounting 35mm DIN Rail
Terminal Type Pillar
Terminal Capacity 1.0-16mm²
Recommended Terminal Torque (IN) 2.0Nm
Recommended Terminal Torque (OUT) 1.2Nm
Standard delivery 1-2 working days
Any order’s over £100 no carriage
Any orders below £100 subject to £10.50 carriage
- Stock: In Stock
- Model: EUB1RC.10/1CA
- SKU: EUB1RC.10/1CA
- MPN: EUB1RC.10/1CA