Europa ET1624HEA 

The Europa ET1624HEA is a single module 1 channel (1N/O + 1N/C contacts) timer with 96, 15 minute segments, Any segment can be used to operate the time relay either in discreet 15 minute intervals or in multiple blocks of 15 minutes together, Battery back up, Din rail mounted, the perfect timer for all industrial, commercial installations where you need all your controls in one place.

The unit is designed to withstand reasonable levels of interference from external sources such as voltage peaks in the electricity supply. If however the supply is known to be subject to unusual level of interference then measures to protect the device from this need to be taken by the installer.

Similarly the output relay is designed to switch a resistive load. If inductive or capacitive loads need to be switched it is suggested that a suitably specified slave device such as a contactor or relay be used to carry out the switch duty.

Supply Voltage: 230Volts 50/60Hz AC

Voltage Tolerance: 220-260Volts AC

Output relay rating: 16Amps AC1 resistive

Output relay type: Single Pole (volt free)

Power consumption: <1 Watt

Drive Method: Quartz controlled stepper motor

Set Period of relay: Minimum of one 15 minute period in 24 hours

Maximum of 96 settable periods in 24 hours

Time Error: <±3 Seconds per Day at 22°C

Ambient temp range: -10°C to +50°C

Operating Humidity: <85%

Working reserve: 72 hours