6mm Solar Cable Black 100 meters

6mm Solar Cable Black

6mm Solar installation cable for small or large Solar panels (large panels over short distances) 

Halogen free to EN 50525-1 Annex B (EN 50267-2-1, EN 50267-2-2, IEC 60754-1, IEC 60754-2)

low smoke emission to IEC 61034, EN 61034 (Light Transmittance > 60%)

Weather resistant  Weathering/UV resistance: to EN ISO 4892-1 and 4892-3 (Method A)tensile strength and elongation at break after 840h (70 Cycles) of exposure to UV lights

Resistance to fire Flame propagation to EN 60332-1-2 (Single Cable Flame Test) Drip particle class: d2, Tested according to CPR: EN 50399 Common test methods for cables under fire conditions Heat release and smoke production measurement on cables during flame spread test, UNI EN 13501-6

Flammability class: Dca

Smoke emission class: s2

Direct Burial, Impact test resistance of single conductor type USE and USE-2 cables (tested acc. to UL854) Rodent resistance safety can be optimized by utilizing protective hoses and cables with spinning or braid metallic coatings

Water resistance AD8 category Tested with successful acc. to EN 50525-2-21 “Annex E” (after immersion for 100 days / 2.400 h to 50°C)

Lifetime, to EN 50618 : 25 years the cables are designed to operate at a normal max conductor temperature of 90°C, but for a maximum of 20.000 hours a max. conductor temperature of 120 °C at a max. ambient temperature of 90 °C is permitted. (test according to EN 60216-1 and EN 60216-2)

Max.short circuit temperature 250°C (for 5 sec.)

Resistance to cold Cold Bending EN 50618, Table 2: Test at -40°C acc. to EN 60811-504;

Cold Elongation Test at -40°C acc. to EN 60811-505;

Cold Impact Test at -40°C acc. to EN 50618 Annex C and EN 60811-506.

Damp-Heat Test Acc. to EN 50618, Table 2 (test acc. to EN 60068-2-78) : 90°C for 1.000h and min. 85% humidity